Problem

Solution

 

 

 

The incoming messages may be too long. Remind callers to

Troubleshooting

 

Messages are

leave a brief message.

 

incomplete.

The memory may be full. Delete some or all of the saved

 

 

 

 

 

messages.

 

 

After a power failure, the

Record your personal outgoing message again. The default

 

 

outgoing message is

 

 

message should remain.

 

 

deleted.

 

 

 

 

 

No sound on the base

 

 

 

unit speaker during call

Adjust the speaker volume on the base unit.

 

 

monitoring or message

 

 

 

 

 

playback.

 

 

 

Cannot access remote

Make sure you’re using the correct PIN code.

 

 

call-in features from

Make sure that the touch-tone phone you’re using can transmit

 

 

another

the tone for at least two seconds. If it cannot, you may have to

 

 

touch-tone phone.

use another phone to access your messages.

 

 

 

 

If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take your phone to your local RadioShack store for assistance.

34

Page 34
Image 34
Radio Shack 43-3856 owner manual Incoming messages may be too long. Remind callers to