Radio Shack 43-3856 Testing Stored Emergency Numbers, Erasing a Stored Number from Memory

Memory Dialing

Ô NOTE Ô

Number stored in Speed Dial is independent from the numbers stored in Memory Dial.

An example of this is a bank account number. Once you have called your bank, and are prompted to enter the account number, press MEM and the location number where the special number has been stored.

Store your special number in memory as you would store a phone number. (See “Storing Phone Numbers in Memory” on Page 15.)

ERASING A STORED NUMBER FROM MEMORY

1.Press MEM twice.

2.Press the memory location (0-9). You hear a confirmation tone and the stored number is erased from memory.

Testing Stored Emergency Numbers

If you store an emergency service’s number (police department, fire department, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to explain the reason for your call.

ONE-TOUCH SPEED DIAL

You can store your most frequently dialed number in the One-touch Speed Dial location. The One- touch Speed Dial allows you to dial a number with one key press. (There is no need to press talk. The phone will automatically dial the number stored.)

STORING THE SPEED DIAL Ô

1.When the phone is in the standby mode, press

MEM. The TALK/BATT LOW LED flashes.

2.Enter the phone number, up to 20 digits.

3.Press MEM again.

16