OPERATION
ARMING/DISARMING THE SYSTEM
You can arm the system three ways:
•Set INSTALL/RUN 1/RUN 2 on the console to RUN 1 or RUN 2 and press ARM on the console.
•Set INSTALL/RUN 1/RUN 2 on the console to RUN 1 or RUN 2 and press ARM AWAY or ARM HOME on the handheld remote control. See “Arm Away/Arm Home” and “Instant/Delay Mode.”
•Set INSTALL/RUN 1/RUN 2 on the console to RUN 1 or RUN 2 and press ARM on the keychain remote control.
The console beeps once when you arm it. When the system is armed, the RUN 1 and RUN 2 setting have the same effect: opening a door or window with a sensor transmitter attached or tripping a motion detector sets off the alarm.
The only difference between RUN 1 and RUN 2 is that when the system is set to RUN 2 and not armed, the con- sole sounds a pleasant chime when you open a door or window. When it is set to RUN 1, there are no chimes.
To disarm the system, press DISARM on any remote control. The console beeps twice.
Arm Away/Arm Home
| WIRELESS |
|
|
|
|
|
|
|
| SECURITY |
|
|
|
|
|
|
|
| SYSTEM |
|
| ARM |
|
|
|
|
|
|
|
|
|
|
|
| |
| • |
| HOME |
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| AUTOMATIC |
|
| ARM |
|
|
|
|
|
|
| DI | SAR | M | |||
| MESSAGE |
|
| AWAY | ||||
| DIALLER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
All sensor transmitters arm when you press ARM AWAY. Also, a module set to the same House and Flashing Alert Unit Code you selected when you set up service with ORCA Monitoring Ser- vices turns on at dusk and off around 11:30 PM and modules set to the same House Code and
If you press ARM HOME, only doors and windows arm. This lets you arm the system at night without tripping the motion detector.
Instant/Delay Mode
With ENTRY on the handheld remote set to INSTANT (and DELAY on the sen- sor transmitter(s) set to MIN), the sys- tem instantly arms and the alarm immediately trips if any sensor trans- mitter reports an intrusion.
With ENTRY on the handheld remote set to DELAY, you have a
23
