SWITCHING BETWEEN THE HANDSET AND SPEAKERPHONE
To switch to the speakerphone while you are using the handset, press SPEAKER on the base. When you hear the conversation on the speakerphone, press TALK on the hand- set.
To switch to the handset while you are using the speakerphone, lift the handset off the base. If the handset is away from the base, press TALK, then press SPEAKER.
USING BOTH THE HANDSET AND SPEAKERPHONE
If someone else is using the speakerphone, press TALK on the handset to join the con- versation. If someone else is using the hand- set, press SPEAKER on the base to join the conversation.
During the call, one person can hang up and let the call continue at the other keypad. Or, both people can hang up to end the call.
Note: If you hear a
USING FLASH
FLASH performs the electronic equivalent of a switchhook operation for special services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
FLASH
REDIAL/
PAUSE
USING REDIAL
To quickly dial any of the last three numbers dialed, lift the handset and repeatedly press REDIAL/PAUSE until the desired number ap- pears on the display, then press TALK.
Notes:
•The redial memory holds up to 32 digits, so you can redial
•The redial memory also holds pause entries (see “Entering a Pause” on Page 19).
USING TONE SERVICES ON A PULSE LINE
Some special services, such as
1.Be sure DIAL MODE is set to P.
2.Dial the service’s main number. When the service answers, press TONE (∗) on the handset. Any additional numbers you dial are sent as tone signals. When you hang up, the phone automatically resets to pulse dialing.
16 | Telephone Operation | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
