•The USOC number of the jack to be installed is RJ11C (RJ11W for a wall plate).
press down on the bracket’s latches and insert them into the lower slots.
On a Desk Top
1.Plug one end of the supplied long modu- lar cord into the TEL LINE jack on the back of the base.
2.Plug the modular cord’s other end into a modular telephone line jack.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the adapter’s cord through the strain relief slot on the bottom of the base.
To AC Adapter | To Phone Line Jack |
2.Plug one end of the supplied short mod- ular cord into the TEL LINE jack on the back of the base as in Step 1 of “On a Desk Top.”
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack as in Step 3 of “On a Desk Top.”
4.Route the adapter and modular cords through the grooves on the bracket.
Strain Relief Slot
5.Plug the adapter into a standard AC out- let.
6.Lift the base’s antenna to a vertical posi- tion.
On a Wall Plate or Wall
1.Insert the two tabs at the top of the nar- row end of the supplied bracket into the base’s upper tab slots as shown, then
5.Plug the modular cord’s other end into the wall plate jack, then align the bracket’s keyhole slots with the wall plate studs and slide the base down- ward to secure it.
Installation | 9 |
