Radio Shack Audio/ Video Remote Control owner manual Fm Page 9 Tuesday, February 29, 2000 204 PM

15-1994.fm Page 9 Tuesday, February 29, 2000 2:04 PM

3.Press VCR then hold down P until the red light blinks twice.

4.Enter the 4-digit code.

For example, to replace a Panasonic TV/VCR combination’s remote control (set-up code 1162), press VCR, hold down P until the red light blinks twice, then press 1 1 6 2.

When the red light blinks twice, the remote con- trol has accepted the code.

Note: If the code you entered is invalid, the red light makes one long blink.

5.Point the 6-in-One at your TV/VCR combination and press POWER or PLAY. Your TV/VCR com- bination should turn off or start to play.

If the remote does not operate your TV/VCR combi- nation, try the other codes you wrote down in Step 1.

Note: Some TV/VCR combinations require a second code to control volume. If you cannot control the vol- ume, use the TV code listed in “TV/VCR Combina- tions” on Page 37.

Need help? Call 1-888-284-8735

9