Radio Shack Audio/ Video Remote Control owner manual Preparation, Installing Batteries

Models: Audio/ Video Remote Control

1 52
Download 52 pages 7.45 Kb
Page 6
Image 6

15-1994.fm Page 6 Tuesday, February 29, 2000 2:04 PM

PREPARATION

INSTALLING BATTERIES

Your RadioShack 6-in-One Smart A/V Remote Con- trol requires four AAA batteries (not supplied), avail- able at your local RadioShack store.

Cautions:

Use only fresh batteries of the required size and recommended type.

Do not mix old and new batteries, different types of batteries (standard, alkaline, or recharge- able), or rechargeable batteries of different capacities.

1.Press the battery compartment cover’s tab and lift off the cover.

2.Place the batteries in the compartment as indi- cated by the polarity symbols (+ and –) marked inside.

3.Replace the cover.

If you installed the batteries correctly and the red in- dicator does not light when you press POWER, re- place the batteries.

Note: You do not need to reprogram your remote control after removing the batteries, because no stored information is lost during battery replacement.

Cautions:

Dispose of old batteries promptly and properly. Do not burn or bury them.

Always remove old or weak batteries. Batteries can leak chemicals that can destroy electronic parts.

Need help? Call 1-888-284-8735

6

Page 6
Image 6
Radio Shack Audio/ Video Remote Control owner manual Preparation, Installing Batteries