DC9V 200mA
7.Close the cover and secure it with the screw.
When %$71#/2: flashes or the display dims, replace the batteries.
Warning: Dispose of dead batteries promptly and properly; do not bury or burn them.
Caution: Always remove old or weak batteries. Batteries can leak chemicals that can damage your CID.
Note: If you replaced the batteries, reconnect the phone line, AC adapter, and the phone.
CONNECTING AC POWER
Cautions:
You must use a Class 2
!power source that supplies 9V DC and delivers at least
200 mA. Its center tip must be set to negative and its plug must fit the
CID'sjack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the CID or the adapter.
Preparation13
