Radio Shack ET-007 owner manual Read this Before Installation, FCC Statement

Models: ET-007

1 24
Download 24 pages 796 b
Page 3
Image 3

43-007.fm Page 3 Wednesday, March 22, 2000 11:24 AM

Carry Strap — lets you hang the remote dial card from your neck for handsfree carrying.

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION

!

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform

!maintenance instructions are

included in the literature accom- panying this product.you that important operating and

Your ET-007 is listed to UL standards and meets all applicable FCC stan- dards.

READ THIS BEFORE INSTALLATION

We have designed your phone to con- form to federal regulations and you can connect it to most phone lines. However, each device that you connect to the tele- phone line draws power from the line. We refer to this power draw as the phone's Ringer Equivalence Number (REN). The REN is shown on the bottom of your phone.

If you use more than one phone or other device on the line, add up all the RENs. If the total is more than five (three in ru- ral areas), your phones might not ring. If ringer operation is impaired, remove one of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of FCC Rules. Upon request, you must provide the phone's FCC registration number and REN to your telephone company. These numbers are shown on the bottom of the phone.

Note: You must not connect your ET-

007 to:

coin-operated systems

party-line systems

most electronic key phone systems

3

Page 3
Image 3
Radio Shack ET-007 owner manual Read this Before Installation, FCC Statement