43-007.fm Page 7 Wednesday, March 22, 2000 11:24 AM

4.Route the adapter's cord through the strain relief slot on the bottom of the phone.

5.Lift the base telephone's antenna to a vertical position.

CONNECTING THE HEADSET CHARGER, WIRELESS HEADSET AND INFRARED REMOTE DIAL CARD

Wireless

Headset

Headset

Charger

To connect the headset charger, con- nect the headset charger’s built-in AC cord to the AC outlet. The plug fits only one way.

Follow these steps to connect the wire- less headset:

1.Slide open the battery compartment cover on the left side of the headset.

2.Install the supplied rechargeable nickel-metal hydride (Ni-MH) battery

pack in the headset’s battery com- partment with the battery contact points down.

Battery

Pack

Important: You must install the bat- tery pack and fully charge it before you can use the headset (see “Charging the Battery Pack” on Page 10).

3.Replace the cover.

4.Place the headset on the headset charger. The charging indicator on the headset lights red, then flashes slowly when the battery pack is fully charged.

Notes:

The charging indicator lights when the headset is on the head- set charger, even if there is no battery pack in the headset. Be sure the battery pack is inserted before charging.

7

Page 7
Image 7
Radio Shack ET-007 owner manual Wireless Headset Charger