TURNING CALLER ID/ CALL WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID service, you can set the phone to show Call- er ID information for an incoming call even while you are using the phone.
Follow these steps to turn the Caller ID/ Call Waiting feature on or off.
1.Lift the handset and hold down CALL ID.
2.Press 2 or VOL/CID 9 to select CIDCW (Caller ID/Call Waiting).
3.Press CH/SELECT to change the Caller ID/Call Waiting setting. On or Off appears indicating the selected setting.
Return the handset to the base or press CALL ID to store the new setting.
STORING YOUR AREA CODE
You can store your local area code in the phone’s Caller ID record so it does not store the area code if the received call is from your local area. If for some reason you need to
dial the area code (or store in the memory), you can add it afterwards. “Adding/Deleting the Area Code” on Page 20.
Note: If your calling area requires
Follow these steps to store your area code.
1.Lift the handset and hold down CALL ID.
2.Press 3 or VOL/CID 9 twice to select Area Code.
3.Press CH/SELECT, then enter your three- digit area code. If you make a mistake, repeatedly press 6 or 7 to move the cursor over the incorrect digit, then enter the correct number.
Note: If an area code is already stored, it ap- pears on the display. To delete the area code, press DELETE three times. Then enter your area code. Or you can use 6 or 7 to move the cursor and edit the area code.
Press CH/SELECT to store the area code,
then press or return the handset to the base to clear the display.
ˆOperation
MAKING AND RECEIVING CALLS
To make a call, lift the handset and press TALK. Talk and the current volume setting (see “Adjusting the Handset Volume” on Page 14) appear on the handset’s display, and the CHARGE/IN USE indicator on the base lights. Then dial the number. The num- ber displays on the handset as you dial, then the call’s elapsed time displays.
You can also dial the number before you press TALK.
If you make a mistake, press DELETE until the incorrect entry is erased, then enter the correct number. To delete the entire number, hold down DELETE for at least 2 seconds.
Operation | 13 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
