Radio Shack ET-548 owner manual Setting the Dialing Using the Belt Clip Mode

43-1048.fm Page 10 Tuesday, August 17, 1999 12:45 PM

SETTING THE DIALING	USING THE BELT CLIP
MODE	Use the belt clip to hang the remote key-
	pad on your belt or waistband for hands-
Illustration	free carrying.
	Illustration

Set TONE-PULSEon the side of the base for the type of service you have. If you are not sure which type you have, do this sim- ple test after charging the battery.

1.Set POWER to ON.

2.Set TONE-PULSE to TONE.

3.Lift the remote keypad from the base. Then press TALK/HANG UP and listen for a dial tone.

4.Press any number other than 0.

If the dial tone stops, you have touch- tone service. Leave TONE-PULSEset to TONE.

If the dial tone continues, you have pulse service. Set TONE-PULSEto

PULSE.

10