![](/images/new-backgrounds/1304177/30417721x1.webp)
Once you choose an antenna, follow its mounting instructions. Then route the cable to the transceiver and con- nect the cable to the ANT jack on the back of the transceiver.
Cautions:
• Avoid routing the cable next to sharp edges or moving parts, which might damage the cable.
• Do not run the cable next to power cables or other radio antenna cables.
•Do not run the cable through the engine compartment or other areas that produce extreme heat.
To achieve your radio's maximum range, adjust the antenna's Standing Wave Ratio (SWR). You can use an SWR meter (not supplied) to adjust the SWR for your antenna.
Follow the instructions supplied with the SWR meter and antenna to adjust your antenna's SWR to the lowest possible value. SWR values of 2.0:1 are generally acceptable, with readings of 1.5:1 or lower being more desirable.
Caution: You might damage your transceiver if you use it at a high SWR value.
11