Radio Shack HTX-10 owner manual

3.To transmit, hold down the push-to-talk button on the micro- phone, hold the microphone 2–3 inches from your mouth, and speak in a normal tone of voice. TX appears along with a bar graph which shows the strength of your transmission.

4.When you finish transmitting, release the PTT button. TX and the signal strength bars disappear.

5.To turn off the transceiver, rotate OFF/VOLUME counterclock- wise until it clicks.

NOTES ON SSB RECEPTION

•If the voice sounds distorted, slowly rotate FINE to bring the signal into its natural voice tonal range.

•An SSB signal produces a fluttering, unintelligible sound when received in the AM mode. Set the mode switch to either LSB or USB, and adjust FINE. If the voice is still not intelligible, it might be an SSB signal operating on the other sideband — try the other SSB mode.

19