To connect the external speaker to the transceiver, insert the speaker's plug into the EXT jack on the back of the transceiver

Note: Connecting an external speaker disconnects the transceiv- er's internal speaker.

USING VEHICLE BATTERY POWER

Follow these steps to connect the transceiver to your vehicle’s bat- tery power.

1.Connect the red wire (with in- line fuse holder) from the back of the transceiver to a point in your vehicle's fuse block that has power only when the ignition is in the ACC (accessory) or ON posi- tion.

Red wire to positive (+) terminal

2. Connect the black wire to a

Black wire to

metal part of the vehicle's

negative (-) terminal

 

frame (chassis ground).

 

13

Page 13
Image 13
Radio Shack HTX-10 owner manual Using Vehicle Battery Power, Frame chassis ground