24
Using SHIFT
The transceiver’s shift function lets you set the transmit frequency
shift from the receive frequency in either direction within the
range of 0.0 Hz to 990 kHz.
Follow these steps to set the frequency shift direction and offset
frequency.
1. To set the frequency shift direction to +, press PUSH FUNC
then press SHIFT while FUNC appears. +SHIFT appears.
Press PUSH FUNC and SHIFT again while FUNC appears to
set the frequency shift direction to -. -SHIFT appears.
2. Press PUSH FUNC then SHIFT for about 3 seconds. 000
appears.
3. Rotate TUNE to set the offset frequency to any frequency
from 0 to 990 kHz.
4. To exit, hold down PUSH FUNC and SHIFT together for about
3 seconds.
Using T-LOW (Tone-Low)
Press PUSH FUNC then T-LO W to turn the high-cut filter on or off.
LOW appears when the high-cut filter is on.
19-1110.fm Page 24 Friday, March 24, 2000 9:42 AM