Radio Shack HTX-10 Using LCR Last Channel Recall, Using M-LOAD, Using NB Noise Blanker

Using LCR (Last Channel Recall)

Press LCR to return to the last channel you selected.

Using M-LOAD

You can recall frequencies stored in memory Channels 1–5.

Note: See “Using M-SAVE (Memory Save)” on Page 25 for more information about storing frequencies in memory channels.

To recall a memory channel, press M-LOADso L appears, then, press the desired memory channel number.

Using NB (Noise Blanker)

If the transceiver’s reception is disturbed by interference from electrical noise (such as ignition noise), you can reduce the noise by using the transmitter’s noise blanker feature. To turn on or off the noise blanker, press PUSH FUNC then NB. NB appears while the noise blanker is on.

23