IMPORTANT!

Be sure to use the microphone’s ON/OFF switch to turn off the microphone and to disconnect the microphone from the keyboard whenever you are not using it.

Recommended Microphone Type

Dynamic microphone (standard plug)

IMPORTANT!

Be sure to disconnect the microphone from the keyboard whenever you are not using it.

Howling (Feedback Noise)

Any of the following conditions can cause howling (feedback noise).

Covering the head of the microphone with your hand

Positioning the microphone too near to a speaker

Should howling occur, try grasping the microphone further away from the head, and move away from any nearby speaker.

Static Noise

Fluorescent lighting can cause static noise in the microphone signal. When this happens, move away from the lighting you suspect may be causing the static.

648U-E-017A

Basic Operations

This part of the manual provides you with the basic information you need to use your keyboard.

To switch power on and off

1. Set the POWER/MODE selector to NORMAL.

2. Press the keyboard keys.

3. Use the MAIN VOL slider to set the volume to a relatively low level.

4. To switch power off, set the POWER/MODE selector to OFF position.

To change tones

1. Look at the tone list* printed on the keyboard’s console and find the one you want.

*See “GM Tone Map List” on page A-1 for details.

2.Press the TONE button.

Indicator appears

G r a n d P n o

3. Use the number buttons to input the 2-digit number that identifies the tone you want to select.

Example: To select “26 ACOUSTIC BASS”, input 2 and then 6.

A c o . B a s s

NOTE

Always enter two digits for the tone number. If you enter only one digit, the display will automatically return to the previous tone number setting after a few seconds.

If you change the tone setting while a keyboard key is depressed, the tone does not change until you release the key and press a keyboard key again.

With certain tones (such as percussion sounds and sound effects), there may be very little or no change at all in the pitch, no matter which keyboard key you press.

If you input the wrong first digit for a tone number, you can return to the previous setting by pressing the TONE button.

E-15

LK-1261_e_14-21.p65

Page 15

04.6.15, 3:33 PM Adobe PageMaker 6.5J/PPC

Page 17
Image 17
Radio Shack LK-1261 To switch power on and off, To change tones, Press the Tone button, Recommended Microphone Type