1.Repeatedly press SEARCH to select your desired search bank (/.ò, /.ñ, /.ð, /.ï, /.î, or /.í).
2.In the marine and CB bands, you can directly select a channel or search through the band. When ) appears at the left most position of the second line, you can directly select a channel (refer to the follow- ing band charts). Press the desired channel number
while ) appears to select it. You can also change the channels by pressing 8or 9.
3.Press FUNC then SEARCH while ) appears. ) changes to / and now you can search through the band. Press FUNC then SEARCH again to return to the previous mode.
4.Rotate SQUELCH clockwise and leave it set to a point just after the hissing sound stops. After 2 sec- onds (if the delay feature is on), the received fre- quency appears and the scanner starts searching.
5.When the scanner finds an active frequency, it stops searching.
Search bank: SR0 Marine band
Receive mode: FM
CHANNEL | FREQUENCY | CHANNEL | FREQUENCY |
| (MHz) |
| (MHz) |
|
|
|
|
|
|
|
|
01 | 156.050 | 05 | 156.250 |
|
|
|
|
06 | 156.3000 | 07 | 156.3500 |
|
|
|
|
08 | 156.4000 | 09 | 156.4500 |
|
|
|
|
10 | 156.5000 | 11 | 156.5500 |
|
|
|
|
12 | 156.6000 | 13 | 156.6500 |
|
|
|
|
14 | 156.7000 | 15 | 156.7500 |
|
|
|
|
