![](/images/new-backgrounds/1204023/20402353x1.webp)
3.Repeatedly press MODE to select )+0 (Motorola) or ! (EDACS).
4.Press PGM and select the channel number using 8 or 9.
5.Enter the UHF trunking frequency and press ENTER.
6.Repeat Steps 4 and 5 to enter the other trunking group frequencies for EDACS or additional control channel frequencies for Motorola systems.
7.If necessary, press MODE to change the receiving mode.
STORING TEXT TAGS
You can customize your scanner by storing text tags (up to 12 characters) for easy identification of channel trans- missions, trunk IDs, or banks.
Assigning a Text Tag to a Channel
1.Press MANUAL, enter the channel number where you want to enter the text, then press MANUAL again. ) and the bank and channel number appear at the upper left corner of the display (for example:
)ñòò).
2.Press PGM. ) changes to ,.
3.Press TEXT. The cursor appears at the third line.
4.Enter the text using the numeral keys (see “Text Input Chart” on Page 29).
Note: If you make a mistake, press 8 or 9 to move to the character you want to change.
For example, to identify amateur (ham) radio trans- missions in the 6 meter range, input "HAM 6m" as follows:
•"H" is the second letter associated with 4 on the keypad. Press 4 then 2.
Operation27