Radio Shack PRO-93 owner manual Finding and Storing Active Frequencies, Bank Band

FINDING AND STORING ACTIVE FREQUENCIES

You can search for transmissions in the scanner’s pre- programmed search bank. The search bank is divided into six search bands. You can change the search range of Bank SR5 manually by setting the lower and higher ends of the search range.

Notes:

•You can use the scanner's delay feature while searching the search bank. See “Using the Delay Function” on Page 42.

•The scanner does not search locked-out frequen- cies while searching ranges. See “Locking Out Channels or Frequencies” on Page 42.

Searching a Preprogrammed Frequency Range

The scanner contains these preprogrammed search ranges, stored in the search bank (SR0 – SR5).

Bank	Band
SR0	..................................................................... Marine
SR1	........................................................................... CB
SR2	............................................................... Police/Fire
SR3	Aircraft
SR4	Ham
SR5	Limit search (User changeable)

To select preprogrammed search bands and search them for active frequencies:

30Operation