![](/images/new-backgrounds/1204023/20402397x1.webp)
that operate are FUNC, /
, SQUELCH, and VOL- UME.
Note: You cannot activate the key lock while you are en- tering a frequency into a channel.
To turn on the key lock, press FUNC then /
. '<P CF:B<;ô appears for about 1 second. '<Pý CF:B<;ô ap- pears when you press any key after locking the keypad.
To turn off the key lock, press FUNC then /
. The scanner beeps three times and '<PýLECF:B<; appears.
CHANGING THE DISPLAY CONTRAST
1.Press MANUAL.
2.Press FUNC then 9. 1J<ý 1Gó FNEý B<PJý KFý J<K
:FEKI8JKô appears.
3.Press 8 or 9 to select the contrast.
4.Press ENTER to set the display contrast.
CLONING THE PROGRAMMED DATA
You can transfer the programmed data to and from an- other RadioShack
Follow these steps to clone the data.
1.Turn on both scanners.
2.Connect the connecting cable to each scanner's PC/
IF jack. ÷á(+*!ý)+ !÷ý1,ýKFýJ<E;õýI<DFM<ý:89C<ýKF
<O@Kôýappears.
3.Press 8. áFE=@IDýJ<E;ý;8K8åýñæ5!/ý,I<JJýFK?<I
B<Pý=FIý*+ôýappears.
4.Press 1 to send the data to the other unit or press any other key to cancel the operation.
Special Features | 49 |