BASIC OPERATION
SETTING THE TAD TO ANSWER CALLS
To set the TAD to answer calls, press
ANSWER.
•If an outgoing message is recorded, the TAD announces, “Answer on,” and the indicator in the call/mes- sage counter window lights.
•If no outgoing message is recorded, the TAD says, “Answer off, no announcement.” (See “Recording the Outgoing Message.”)
To have the TAD not answer calls, press ANSWER again. The TAD says “Answer off,” and the indicator turns off.
RECORDING INCOMING MESSAGES
After the TAD answers a call, the outgo- ing message plays. After the TAD beeps at the end of the announcement, the caller must select a mailbox by en- tering a number
The maximum incoming message re- cording length is 60 seconds. If a re- cording reaches 55 seconds, the TAD beeps once to notify the caller that time will be up soon. If a recording reaches 60 seconds, the TAD beeps three times, then disconnects.
The TAD automatically stops and hangs up if it detects silence for over 8 sec- onds.
If the memory is full, the TAD announc- es, “Memory is full” and displays FL, then disconnects.
12
