43-775.fm Page 27 Friday, August 13, 1999 3:25 PM
Press PLAY on the base, or press RE- MOTE then 2/PLAY on the handset.The TAD announces the number of mes- sages and whether the messages are old (already listened to) or new. Then it plays each new message, followed by the day and time it was recorded.
When you have both old and new messages, the TAD first plays back only new messages. After you have listened to the new messages, you can listen to all messages (old then new) by pressing PLAY again.
If there are no messages when you press PLAY, the TAD sounds a beep and announces “You have no mes- sages.”
While playing back the messages, the TAD displays the number of the cur- rent message. For example, if you have a total of four messages (one old, three new), pressing PLAY dis- plays 2 (the first new message).
Notes:
•If the TAD detects a busy signal or silence for more than 7 seconds after a message is left, it stops recording and releases the call.
•When you play back messages using the handset, the message
number does not appear on the display.
To skip to the next message, press SKIP (or SKIP/3 on the handset).
To play the current message again, press REPEAT (or REPEAT/1 on the handset).
Note: If you press REPEAT within 2 seconds after a message begins play- ing, the TAD repeats the previous message.
After all messages and memos have played, the TAD says “End of mes- sages.” To stop playback before the end of the messages, press STOP (or 7/STOP on the handset).
27
