Radio Shack TAD-1018 Setting the PHONE’S Volume, Using Tone Services with a Pulse Line

Note: If you do not have any special telephone services, pressing FLASH might disconnect your current call.

SETTING THE PHONE’S VOLUME

Slide VOL (volume) on the handset to set the handset’s volume to the de- sired level.

USING TONE SERVICES WITH A PULSE LINE

Some special services, such as alter- nate long-distance and bank-by- phone, require tone signals. If you have pulse service, you can still use special services by following these steps.

1.With TONE/PULSE set to PULSE, call the special service.

2.When the service answers, press TONE. Any additional numbers you dial are sent as tone signals.

3.When you complete the call, hang up the phone. The phone auto- matically changes back to the pulse mode.

13