Radio Shack TAD-1018 owner manual Placing the Phone on a Desk TOP, Mounting the Phone on the Wall

PLACING THE PHONE ON A DESK TOP

To use your answering system on a desk, table, or shelf, plug the tele- phone cord into a modular phone jack.

Plug one end of the coiled handset cord into the handset jack on the an- swering system and the other end into the jack on the handset. Place the handset on the cradle.

1.Pull the handset holder toward you as far as it will go. Hold it out as you rotate the holder 180°, then let it snap back in place.

The holder’s tab holds the hand- set in the cradle while the answer- ing system is mounted on the wall.

2.To mount the TAD-1018 directly onto the wall, drill two holes 31/4 inches apart, one above the other, at the desired location.

MOUNTING THE PHONE ON THE WALL

Using the supplied mounting bracket, you can mount the TAD-1018 on a phone jack wall plate or directly on the wall.

If you are mounting the phone directly on the wall, you need two screws with heads that fit into the bracket’s key- hole slots.

8