INSTALLATION

SELECTING A

LOCATION

You can set the TAD-1018 on a flat surface (such as a desk top or counter top), or mount it on a wall plate or di- rectly on the wall.

Select a location that is:

Near an AC outlet

Near a modular phone line jack

If the phone line jack is not a modular jack, you must update the wiring. You can convert the wiring yourself, using jacks and adapters available at your local RadioShack store. Or, you can let the phone company update the wir- ing for you.

Note: The USOC number of the jack to be installed is RJ11C.

LOADING THE

CASSETTE

Your answering system comes with an MC-60 cassette tape (30 minutes of recording time per side). You can buy additional and different length cas- settes at your local RadioShack store.

1.Turn the supplied cassette’s hub with the tip of a pencil to take up any tape slack.

2.Lift open the cassette compart- ment door.

3.Put the cassette in the compart- ment with its full reel toward the back of the answering system and its open edge to the right.

4. Close the compartment door.

5

Page 5
Image 5
Radio Shack TAD-1018 owner manual Installation, Selecting a Location, Loading Cassette