Remote ANSWER-ON

You can use any remote phone to set the answering system to answer calls if:

•The answering system has power,

•The cassette is loaded, and

•The answering system is off.

To set the answering system to an- swer calls, dial your phone number and wait about 60 seconds until the answering system answers. Then hang up the phone.

Note: Be sure to turn on the system when you get home, to play back any recorded messages.

Page 18

Image 18

Radio Shack TAD-1018 owner manual Remote ANSWER-ON

Contents

TAD-1018 Features Answering SystemTelephone Read this First FCC Statement Contents Installation Selecting a LocationLoading Cassette Connecting Power Recording the Outgoing Message Checking the Outgoing Message Placing the Phone on a Desk TOP Mounting the Phone on the WallPage Setting the Dialing Mode Setting the Number of RingsTurning OFF/ON the Ringer Page Using Flash Using PauseUsing Redial Telephone Operation Setting the PHONE’S Volume Using Tone Services with a Pulse Line Setting the Answering SYSTEM’S Volume Setting the Answering System to Answer CallsSetting Recording Time Answering System Operation Screening Calls Playing MessagesPage Remote Control Operation Remote PlaybackErasing Messages Remote ANSWER-ON Troubleshooting Problem Cause Solution Problem Cause Solution Care and Maintenance FCC Wants YOU to Know LightningPage RadioShack Division of Tandy Corporation Fort Worth, Texas