Manuals / Rangemaster / Kitchen Appliance / Range

Rangemaster 90 manual You will also need the following tools, Checking the parts

Models: 90

1 40

Download 40 pages 32.71 Kb

Page 25

You will also need the following tools:

You will need the following equipment to complete the cooker installation satisfactorily

STABILITY BRACKET

9.Pencil

10.Adjustable spanner

11.Screws for fittingstability bracket

If the cooker is to be supplied with gas through a ﬂexible hose, a stability bracket or chain must be ﬁtted.

These are not supplied by with the cooker but are available at most builders’ merchants.

GAS PRESSURE TESTER

FLEXIBLE GAS HOSE

Must be in accordance with the relevant standards.

MULTIMETER

(for electrical checks)

You will also need the following tools:

1.Electric drill

2.Masonry drill bit

(only required if fitting the cooker on a stone or concrete floor)

3.Rawlplugs

(only required if fitting the cooker on a stone or concrete floor)

4.Steel tape measure

5.Cross head screwdriver

6.Flat head screwdriver

7.4mm & 3mm Allen keys

8.Spirit level

Checking the parts

	3 pan supports	Griddle plate
	Grill pan and trivet	Levelling tool
	Handyrack	Meat tin
	2 Main oven shelves	Tall oven shelves & shelf
	2 Main oven shelves	supports.
		supports.
	Splashback & Plinth	Conversion kit from Natural
	Splashback & Plinth	gas to LP gas
		gas to LP gas
	25

Image 25

Rangemaster 90 manual You will also need the following tools, Checking the parts

Contents

90 Dual Fuel Users Guide Installation & Service Instructions U104900-01Gas and Electricity on Be safePeculiar smells Contents Hotplate Burners The Griddle The Wok cradle Care and CleaningNever close the grill door when the grill is on The GrillThe Left Hand Oven The OvensThe Right Hand Tall Oven To stop the beeper when it sounds Setting the time of dayThe Clock To time something that’s cooking minute minderClock Special Features - Key Lock Both Ovens Cooking using the timerMulti-functionoven functions Multi-functionovenDefrost Fan ovenConventional oven top and base heat HandyrackBrowning element Base heatTall oven shelves Oven shelvesSteam Oven lightMulti-functionOven cooking guide Cooking chart - Fan assisted oven function500g is approximately 1lb 1lb 2oz ROAST MEATS FISHPOULTRY CAKESHotplate burners Cleaning your cookerEssential information Grill GriddleControl Panel and Doors The Main OvenPart Cleaning TableMoving your cooker TroubleshootingTurn off the power supply If you smell gas General Safety Instructions0800 Take care that no water seeps into the appliance Dear Installer InstallationProvision of Ventilation Location of CookerChecking the parts You will also need the following toolsUnpacking the Cooker Positioning the CookerMoving the Cooker Fit the Handles LevellingFitting the splash back optional The handles should be above the ﬁxingsFitting a stability bracket Pressure testingGas Connection Oven Light Electrical ConnectionHotplate Oven checkPressure Testing Tap adjustmentConversion to LP gas JetsNatural gas SERVICING - WARNINGLP gas Burner6. To Remove Electronic Timer 5. To Remove Oven Light SwitchServicing Notes 1. To Remove the Handrail8. To Change Grill Controller 7. To Remove a Thermostat9. To Change a Hotplate Tap 10. To Change a Hotplate burner jet14. To Remove Main Oven Door 18. To Adjust Oven Door Catch Keep15. To Change Main Oven Door Outer Panel 16. To Change Main Oven Door Catch22. To Replace an Oven Fan 20. To Remove Oven Inner Back23. To Remove an Oven fan Element 24. To Remove Grill Element27 To Remove Tall Oven Door 26. To change Main oven light bulb28. To Change Tall Oven Door Outer Panel 29. To Change Tall Oven Door Magnetic LatchSERVICING - WARNING Circuit Diagram Dimensions Technical DataThis cooker is category II2H3+ Connections