Fitting a stability bracket

A stability bracket or chain (not supplied by with the cooker) should be fitted when the cooker is connected to a flexible gas supply.

When fitting a stability bracket read these instructions together with the leaflet supplied with the bracket.

1.Place the cooker in its intended position and level the cooker.

2.Draw a pencil line 70mm from the front edge of the levelling feet.

3.Mark the centre line for the bracket by measuring 550mm from the left hand side of the cooker.

4.Lower the front roller and move the cooker forward.

5.Measure back from the pencil line 550mm to locate the front edge of the bracket. Fix the bracket to the floor.

6.Measure the height from floor level to engagement edge in back of cooker. Add 3mm to this dimension and assemble the stability bracket to this height. (i.e. from floor level to underside of the top member) and ensure the bracket does not foul the oven burner assembly.

Gas Connection

The Gas supply needs to terminate with a down facing bayonet. The rear cover boxes limit the position of the supply point.

view from the rear

Aposition for gas supply connector

Bappliance gas inlet

Because the height of the cooker can be adjusted and each connection is different it is difficult to give precise dimensions. Ideally the house supply bayonet should be in the shaded area shown in the diagram. Although a 900mm hose can be used, a 1250mm hose will allow slightly more flexibility in the positioning of the bayonet and make moving the cooker easier. The hose should be fitted so that both inlet and outlet connections are vertical so that the hose hangs downwards.

The connector is located just below the hotplate level at the rear of the cooker.

For Natural Gas the flexible hose must be in accordance with B.S.669.

If in doubt contact, your supplier.

Screw connect the threaded end of the hose into the gas inlet in the underside of the connector block on the back of the cooker.

After completing the gas connection, check the cooker is gas sound with a pressure test.

Pressure testing

The gas pressure can be measured at one of the centre hotplate burner injectors (not the Wok burners). Lift off a burner head. Fit the pressure gauge to the injector. Turn on the hotplate burner and turn on and light one of the other hotplate burners.

For Natural Gas cookers the pressure should be 20mbar.

For LP Gas cookers the pressure should be 29mbar for Butane

37mbar for Propane.

Reassemble burner top, making sure it is reassembled in the correct way on the burner body.

28

Page 28
Image 28
Rangemaster 90 manual Fitting a stability bracket, Gas Connection, Pressure testing

90 specifications

The Rangemaster 90 is a sophisticated cooking appliance that embodies both functionality and elegance, making it a popular choice for both amateur chefs and culinary enthusiasts alike. This range cooker is thoughtfully designed to provide a perfect blend of traditional cooking methods with modern technology, ensuring that every meal is prepared to perfection.

One of the standout features of the Rangemaster 90 is its dual fuel capabilities. This allows users to harness the precision of gas cooking for immediate heat control while utilizing the consistent and even temperatures of an electric oven for baking and roasting. This combination ensures that every dish can be prepared with the utmost accuracy, whether it is a delicate soufflé or a hearty roast.

Another significant aspect of the Rangemaster 90 is its generous cooking space. With a 90cm width, it provides ample room for multiple dishes. The oven compartment typically includes two cavities, offering a main oven and a secondary oven that operates as a separate temperature zone. This design feature is particularly advantageous for those who enjoy multitasking in the kitchen, allowing different dishes to be prepared simultaneously.

The Rangemaster 90 also features advanced cooking technologies, such as the multifunction oven, which provides several cooking modes ranging from convection cooking to grilling. This versatility empowers users to experiment with diverse culinary techniques, enhancing their cooking experience. Additionally, many models come equipped with an integrated grill, further expanding the range of cooking options available.

Customization is another hallmark of the Rangemaster 90. It is available in a variety of colors and styles, allowing homeowners to select a model that complements their kitchen décor. The signature look often includes classic features such as a bold control panel, sturdy cast iron pan supports, and elegant handles, making it a visually striking addition to any kitchen environment.

Lastly, the Rangemaster 90 prioritizes ease of use and maintenance. It typically incorporates an easy-clean enamel coating within ovens that simplifies the cleaning process, making this beautiful appliance as practical as it is stylish.

Overall, the Rangemaster 90 is an exceptional cooker that combines state-of-the-art technology, a wealth of cooking options, and an impressive aesthetic appeal, making it a centerpiece for any modern kitchen. Its robust features ensure that it can handle the diverse needs of today’s culinary enthusiasts, whether preparing a casual family meal or an elaborate feast for guests.