Oven not coming on when turned on manually
Is the power on? Is the clock illuminated? If not there may be something wrong with the power supply. Is the cooker supply on at the isolator switch? Is the clock fl ashing 0.00?
If so set it to the correct time of day. Has the Timer been set to AUTO by mistake. If AUTO is showing on the clock display, press the ‘cook period’ button and reduce any set cooking time showing to 0.00, with the (+) and 
button twice.
Is the key symbol (
) showing in the display? See the Clock section of the instructions for more information on the key lock feature of the clock.
Oven not coming on when automatic cooking Timer set correctly but oven knob left OFF by mistake?
Is the key symbol (
) showing in the display? See the Clock section of the instructions for more information on the key lock feature of the clock.
Oven temperature getting hotter as the cooker gets older
If turning the knob down has not worked or only worked for a short time then you may need a new thermostat. This should be fi tted by a service person.
The oven light is not working
The bulb has probably blown. You can buy a replacement bulb (which is not covered under the guarantee) from a good electrical shop. Ask for an Edison screw fi tting 15w 230v lamp, FOR OVENS. It must be a special bulb, heat resistant to 300 °C.
Open the oven door and remove the
Handyrack (if fi tted) and oven shelves.
Turn off the power supply.
Unscrew the bulb cover by turning anticlockwise. Unscrew the old bulb. Screw in the new bulb, screw back the bulb cover. Turn on the electricity supply and check that the bulb now lights.
Current Operated Earth Leakage Breakers Where the cooker installation is protected by a 30 milliamp sensitivity residual current device (RCD), the combined use of your cooker and other domestic appliances may occasionally cause nuisance tripping. In these instances the cooker circuit may need to be protected by fi tting 100mA device. This work should be carried out by a qualifi ed electrician.
If there is an installation problem and I don’t get my original installer to come back to fi x it who pays?
You do. Service organisations will charge for their call outs if they are correcting work carried out by your original installer. It’s in your interest to track down your original installer.
What cleaning materials are recommended for the cooker?
See the ‘Cleaning’ section for recommended cleaning materials. We do not recommend Mr. Muscle, as it contains chemicals that may damage the surfaces of your cooker.
18
