Oven Light |
Press the oven light switch and check that the light is |
working. |
NB The oven light bulb is not included in the |
guarantee |
Hobplate |
Turn on each plate in turn and check that it heats up. |
Grill |
This shows the
the mains cable to the correct terminals for your electrical supply type (see fi g.). Check that the links are correctly fi tted and that the terminal screws are tight. Secure the mains cable using the cable clamp.
These appliances are of type X with regard to protection against over heating of the surrounding surfaces.
Current Operated Earth Leakage Breakers
Where the installation is protected by a 30 milliamp sensitivity residual current device (RCD), the combined use of your cooker and other domestic appliances may occasionally cause nuisance tripping. In these instances the cooker circuit may need to be protected by fi tting 100mA device. This work should be carried out by a qualifi ed electrician
Fitting the plinth
Loosen the 3 screws along the front bottom edge of the cooker. Hook the central keyhole over the central screw. Twist and fi t each end keyhole over their respective screws. Tighten the fi xing screws.
Open the grill compartment door. Turn on the grill control and check that the grill heats up.
Oven check
The clock must be set to the time of day before the ovens will work.
Press and hold as above.
At the same time, press - or + until the correct time shows.
Don’t forget it’s a 24 hour clock.
If you make a mistake or press the wrong button, turn off the power supply for a minute or two and start again.
Turn on the oven and check that the oven fan starts to turn and that the oven starts to heat up. Turn off the oven.
Customer care
Please complete your details in this Guide, inform the user how to operate the cooker and hand over the Instructions.
Thank you.
24
