Rangemaster U102210-04 manual Positioning the Cooker, Checking the parts, Unpacking the Cooker

Models: U102210-04

1 28
Download 28 pages 52.27 Kb
Page 22
Image 22
Positioning the Cooker

Positioning the Cooker

The diagrams below show the minimum recommended distance from the cooker to nearby surfaces.

The hob surround should be level with, or above, any adjacent work surface. Above hotplate level a gap of 75mm should be left between each side of the cooker and any adjacent vertical surface.

For non-combustible surfaces (such as unpainted metal or ceramic tiles) this can be reduced to 25mm.

A minimum space of 650mm is required between the top of the hob and a horizontal combustible surface.

Checking the parts

Grill pan and trivet

Griddle plate

Meat tin

Levelling tool

Handyrack &

Splash back & Plinth

4 main oven shelves

 

A clearance of 130mm is required if the cooker is near a corner of the kitchen to allow the oven doors to open.

*Any cooker hood should be installed in accordance with the hood manufacturer’s instructions.

Surfaces of furniture and walls at the sides and rear of the appliance should be heat, splash and steam resistant. Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage and discolouration. We cannot accept responsibility

for damage caused by normal use of the cooker to any material that de-laminates or discolours at temperatures less than 65°C above room temperature.

For safety reasons curtains must not be fi tted immediately behind the cooker.

We recommend a gap of 1110mm between units to allow for moving the cooker. If a fl ush fi t is required, fi t the cooker up to the unit at one side then fi t the unit the other side. Do not box the cooker in; it must still be possible to move the cooker in and out for cleaning and servicing. The cooker should not be placed on a base.

Unpacking the Cooker

Do not take any packaging off the cooker until it is directly in front of the place it is to be installed (unless it will not fi t through a door in its outer packaging).

See the loose unpacking sheet.

Moving the Cooker

The cooker is very heavy. Take great care.

We recommend two people manoeuvre the cooker. Ensure that the fl oor covering is fi rmly fi xed, or removed to prevent it being disturbed when moving the cooker around. You will need the levelling tool.

Pull the warmer drawer out to its furthest point. Lift it up and out.

22

Page 22
Image 22
Rangemaster U102210-04 manual Positioning the Cooker, Checking the parts, Unpacking the Cooker, Moving the Cooker