Rangemaster U109987 - 01 manual Accessories, Oven Shelves Left-hand Main Oven, Handyrack Main Oven

Accessories

Oven Shelves – Left-hand (Main) Oven

In addition to the flat shelves (Fig.2-30), some models are supplied with a drop shelf (Fig.2-31). The drop shelf increases the possibilities for oven shelf spacing.

The oven shelves can be easily removed and refitted.

Pull the shelf forward until the back of the shelf is stopped by the shelf stop bumps in the oven sides (Fig.2-32).

Lift up the front of the shelf so the back of the shelf will pass under the shelf stop and then pull the shelf forward (Fig.2-33).

To refit the shelf, line up the shelf with a groove in the oven side and push the shelf back until the ends hit the shelf stop. Lift up the front so the shelf ends clear the shelf stops, and then lower the front so that the shelf is level and push it fully back (Fig.2-34).

Oven shelves – Right-hand (Tall) Oven

The tall oven is supplied with four flat cooking shelves (Fig.2-35), and a plate warming shelf (Fig.2-36).

When using the tall oven, you can cook on all four shelves at the same time, but make sure that they are well spaced out allow the hot air to circulate.

The Handyrack (Main Oven)

The Handyrack (Fig.2-37)fits to the left-hand oven door only. Food cooking on it is easy to attend to, because it is accessible when the door is open.

The maximum weight that can be held by the Handyrack is 5.5kg (12lb). It should only be used with the supplied roasting tin, which is designed to fit the Handyrack. Any other vessel could be unstable.

Additional roasting tins are available from our cookware collection – Part Code RM027.

It can be fitted at two different heights. One of the oven shelves must be removed and the other positioned to suit.

When the Handyrack is used in its highest position, other dishes can be cooked on the bottom shelf position or base of the oven.

When the Handyrack is used in its lowest position, other dishes can be cooked on the second shelf position or base of the oven.

To fit the Handyrack, locate one side of it on the door bracket (Fig.2-38).

Then spring the other side out to clip it onto the other bracket (Fig.2-39).

Fig.2-31

�

ArtNo.320-0010 Flat & drop shelves

�
A - Flat shelf,	B - Drop shelf
Fig.2-32	Fig.2-33

ArtNo.320-0011 Removing the shelf 1 ArtNo.320-0012 Removing the shelf 2

Fig.2-34

ArtNo.320-0013 Removing the shelf 3

Fig.2-35 Fig.2-36

ArtNo.324-0002 Oven shelf

ArtNo.324-0010 Plate warming shelf

Fig.2-37

ArtNo.320-0014 Handyrack on LH door

Fig.2-38 Fig.2-39

ArtNo.320-0015	ArtNo.320-0016
Fitting the Handyack 1	Fitting the handyrack 2

11