Operations |
3.5.27 ATIS Operation (RAY230E only)
The RAY230E comes equipped withAutomatic Transmission Identification System (ATIS) capability for inland waterway requirements in Europe. With ATIS enabled, each time the PTT switch is pressed your station ID is sent at the end of the transmission. Before utilizing this feature, you must obtain an ID number, program it into the RAY230E’s system Menu, and activate the ATIS feature. Once activated, ATIS can be enabled or disabled in the system Menu so that the RAY230E can be used in open water or inland waterways.
3.5.28 Alert Operation
This function emits various sounds to attract the operator's attention for confirming a key operation, warning of an erroneous key operation, or informing of a specific state. The different types of alert sounds are described below.
1.Key Click
This sound is made when a handset key is pressed. In the
2.Operation ErrorAlert
This alert sounds when an erroneous key is pressed. In the
3.DSC Distress Alert
This sound is made when receiving a distress call in the DSC receiving mode, receiving an acknowledgment to a transmitted distress signal, or an Urgency signal to All Ships. The alert is output from the external speaker at the maximum sound volume, regardless of the handset volume setting.
4.DSC ReceivedAlert
This sound is made when receiving an Individual Ships Call in DSC receiving mode, a Group Ships Call, or a Safety call to All Ships. In this case the sound is made from the external speaker. The alert is sounded at maximum volume regardless of the volume setting.