![](/images/new-backgrounds/1239535/239535187x1.webp)
Operations |
3.5.30.5Setting Operation (RAY230E)
This operation sets the function features of the RAY230E: the name of the Intercom station, the ATIS ID number and on/off state, the MMSI number, the
1.Press the FUNC key followed by the MENU key to initiate the Menu mode. Mn is shown on the
2.Press the SQ UP/DOWN key to select SETTING.
3.Press the ENT key. The message SET appears on the
INTRCM | selects the Intercom setting |
MYATIS | registers the ATIS ID number |
MYMMSI | registers the MMSI number |
TRI | selects the |
ATIS | turns the ATIS function ON or OFF |
SIREN | selects the siren setting |
Note: The ATIS selection only appears if this option has been enabled by the dealer.
4.Select the desired operation and press the ENT key to submit your selection.
ENT