Operations |
3.5.30.5.5ATIS Set Up
This operation determines whether to effect ID transmission of ATIS after the PTT switch is released.
To set the ATIS function:
1.Per the description in Section 3.5.30.5 Setting Operation (RAY230E) above, select ATIS.
2.Press the ENT key. The message ATS is shown on the
3.Press the SQ UP/DOWN key to toggle between ATIS ON and ATIS OFF.
4.After selecting the desired operation, press the ENT key.
5.If the setting is acceptable, press the ENT key to confirm. The message CONT? Y is displayed.
6.Press the ENT key to register the setting. When ATIS is ON, the ATIS indicator is illuminated on the LCD.
To exit without making changes, press the SQ UP/DOWN key until DEL? N is displayed. Press the ENT key and operation returns to the mode before the Menu operation began.
ENT | ENT |
3.5.30.5.6Siren Set Up
The operation is identical to the Siren set up operation described for the RAY230 in section 3.5.30.4.3 Siren Set Up.
