Operations |
3.5.30.5.1 Intercom Set Up
The operation is identical to the Intercom operation described for the RAY230 in section 3.5.30.4.1.
3.5.30.5.2 MY ATIS Set Up
This operation stores the ATIS number required for the Automatic Transmission Identification System used in inland waterways of some European countries. You can request an ATIS number when you apply for a radio license.
Regulations in some regions may not allow end users to program their own ATIS number. If this unit was purchased to be used in such a region, this function will be disabled and the programming must be done by your Raymarine distributor.
Notes:
•This is a one time operation. Once the ATIS number has been programmed, you will not be able to change it.
•The ATIS ID number is a ten digit number, beginning with a “9”. The MY ATIS set up process has you input only the last 9 digits. The leading “9” is automatically input for you.
To register theATIS Number into memory:
1.Select the MY ATIS function as described above in Section 3.5.30.5 Setting Operation (RAY230E).
2.Press the ENT key. The
3.Press ENT. Nine underscore characters appear, which are placeholders for the last 9 digits of the ATIS number. The first character place to be input is flashing.
Pressing the following keys initiate the corresponding operation: