Raymarine Ray230 manual Siren Set Up

Models: Ray230

1 130
Download 130 pages 37.34 Kb
Page 92
Image 92

Operations

 

3-69

 

ENT

ENT

 

 

Flashing

Input MMSI

 

 

number using

ENT

ENT

numeric keypad

 

Flashing

 

ENT

re-enter

 

 

MMSI No.

ENT

Flashing

ENT

3.5.30.4.3Siren Set Up

This operation changes the tone of the siren that sounds from the Hailer Horn speaker when the SIREN option is selected in Fog/Siren mode, as described in Section 3.5.18.

CAUTION:

The siren sounds available in this radio are for recreational purposes only. It is your responsibility to exercise caution and common prudence when emitting these siren sounds.

To select the siren tone:

1.Select the SIREN function as described above in Section 3.5.30.4 Setting Operation (RAY230).

2.Press the ENT key. Sir appears on the 7-segment display, the dot matrix display indicates CADENC1, and the corresponding call tone sounds from the handset.

3.To change the tone, press the SQ UP/DOWN key to alternate between CADENC2, CADENC3, and CADENC4. As you scroll, the corresponding siren tone sounds from the handset. The table that follows describes the type of tone emitted and the procedure for sounding the siren while in Fog/Siren mode. Mn is shown on the 7- segment display and NAVSTAT appears on the dot matrix display.

Page 92
Image 92
Raymarine Ray230 manual Siren Set Up