Raymarine Ray230 manual Manual Entry of Latitude/Longitude L/L ENT, Y s Action

3-56 Operations

3.5.30.3.2Manual Entry of Latitude/Longitude (L/L ENT)

This operation is used to manually enter the latitude/longitude and UTC time when normal SeaTalk or NMEA input of the position information is not available. The radio will sound a 5-second-long alert tone every four hours to remind you to update your position.

1.As described in section 3.5.30.3 DSC Operation above, select the DSC operation L/L ENT. The 7-segment display shows L L, while the dot matrix display shows the latest latitude data.

2.Press one of the following keys to initiate the corresponding operation:

K e y s	Action
0 - 9 keys	Changes the flashing numeric value (see step 3), then
	advances to the next digit's place.
ENT key	Advances from Latitude, to Longitude, to UTC.
CLR key	Returns to the previous subject item.
SQ UP/	For Latitude, alternates between N and S.
DOWN key	For Longitude, alternates between E and W.
	For UTC, no effect.

3.The subject items can be changed in the following order. Numeric values that can be changed are flashing:

1.	Degrees of lat at ten’s place	8.	Minutes of lon at ten’s place
2.	Degrees of lat at unit's place	9.	Minutes of lon at unit's place
3.	Minutes of lat at ten’s place	10.	Hours of UTC at ten’s place
4.	Minutes of lat at unit's place	11.	Hours of UTC at unit's place
5.	Degrees of lon at hundred’s place 12.		Minutes of UTC at ten’s place
6.	Degrees of lon at ten’s place	13.	Minutes of UTC at unit’s place

7.Degrees of lon at unit's place

4.After changing the subject item, the display scrolls from latitude to longitude to UTC. To submit the change of the position data as shown in the display, press the ENT key. The unit exits Menu mode and returns to normal operation.

To exit the Menu operation, press and hold the CLR key for 3 seconds. The following illustration shows an example of the operation: