Raypak 185A manual Ensure the power and the gas has been shut off

Page 13

P/N 241169 Rev.-3

INSTALLING PILOT HI TENSION: 206 TO 267A:

Ensure the power and the gas has been shut off.

1.Re-connect pilot wire (side B) to new board. See

Fig. 35.

Fig. 35

INSTALLING PILOT HI TENSION WIRE EXTENSION SIZES 335A TO 407A:

Ensure the power and the gas has been shut off.

1.Re-connect pilot wire (side B) to new board with new extension Fig. 36 &

Fig. 37.

2.Connect side ‘A’ to existing pilot wire and center protective sleeve over connection.

EXISTING PILOT

WIRE

Fig. 36

Side

‘B’

Side

‘A’

CONNECT THIS END TO EXISTING PILOT WIRE

CONNECT THIS END TO NEW PC BOARD SPARK LUG

Fig. 37

2151 Eastman Ave., Oxnard, CA 93030 805-278-5300 Fax 800-777-7026 www.raypak.com Technical support is available M-F, 5:30 AM to 5:00 PM PST, at 800-947-2975 or 800-627-2975