RCA 15491880 manual Connection TV + VCR

Connections & Setup

TV (back panel)

FromCabie or Antenna

Connection: TV + VCR

1.Connect your TV to your VCR

A.Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).

B.Connect the attdio/video cables. Connect audio cables (white and red) to the AUDIO IN jacks

on the back of tbe TV (R and L/MONO) and to the Audio Output Jacks on the VCR (sometimes labeled OUT R L).

C.Connect the video cable (yellow) to the VIDEO IN jack on the back of the TV and to the Video Output Jack on the VCR.

,Connect cable or antenna to your VCR

Connect tim coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).

. Connect the G-LINK cable to the TV

A. If you haven't already done so, remove the Demo Pin from the G-LINK jack.

B. Connect the G-LINKcable to the G-LINKjack on tbe TV. Next step, place one of the wands of the G-LINKcable to work with your VCR (instructions are on p. 13).

Go to page 13

8 Chapter 1