RCA 21028 manual Reviewing Records Stored in Memory, Changing Records Stored in Memory

2.Press the Redial button.

3.Press MEM button again to confirm.You will hear a confirmation tone.

NOTE: If the redial number is longer than 20 digits, the redial number cannot be stored in memory.

INSERTING A PAUSE IN THE DIALING SEQUENCE (OF A STORED NUMBER)

Press the #PAUSE button on the handset’s touch-tone pad to insert a delay in dialing sequence of a stored number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence.

You can press the #PAUSE button to insert a P (pause) when you enter the telephone number during memory storing.

REVIEWING RECORDS STORED IN MEMORY

1.Make sure the phone is OFF (not in talk mode).

2.Press the MEM button to display SELECT MEMORY 01-50.

3. Press the CID/VOL ( or ) buttons to scroll the records, or use the handset’s touch-tone pad to enter the memory location number (01-50).

CHANGING RECORDS STORED IN MEMORY

Follow items 1 to 7 for Storing Names and Numbers in Memory.

DELETING RECORDS STORED IN MEMORY

1.Make sure the phone is OFF (not in talk mode).

2.Press the MEM button to display SELECT MEMORY 01-50.

3. Press the CID/VOL ( or ) buttons to scroll to the record you want to delete or use the touch-tone pad to enter the desired memory location (01-50).

4.Press the DEL button to mark the record for deletion. The display shows DELETE?

5.Press the DEL button to delete the record. DELETED shows in the display.

NOTE: If you don’t want to change or delete a record, simply press the *EXIT button, or wait for one minute to exit the review mode automatically.

37