RCA 21028 manual VOL or button to scroll to 1YES or 2NO

AREA CODE

1.Make sure your phone is OFF (not in talk mode).

2.Press the MUTE/PROG button to go to the main menu.

3.	Press CID/VOL ( or	) button to scroll to HANDSET SETUP.
4.	Press MUTE/PROG button to confirm.
5.	Press the CID/VOL (	or ) button to scroll to the AREA CODE menu.

6.Press MUTE/PROG button to enter the menu. SET AREA CODE - - -

shows in the display. The default setting is - - -.

7.Use the touch-tone pad to enter your 3 digit area code.

8.Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the new area code shows in the display.

NOTE: To restore the default setting to - - -, press and release DEL when “SET AREA CODE” shows in the display.

REGISTRATION

This setting may be made with the expandable handsets. Your dual handsets are pre-registered and ready to use. It is not recommended that handset be registered again unless absolutely necessary.

1.Make sure your phone is OFF (not in talk mode).

2.Press the MUTE/PROG button to go to the main menu.

3.	Press CID/VOL ( or ) button to scroll to HANDSET SETUP.
4.	Press MUTE/PROG button to confirm.
5.	If necessary, press the CID/VOL ( or ) button to scroll to the
	REGISTRATION menu.Then, press MUTE/PROG button to enter the menu.
	REGISTRATION ? 1YES 2NO shows in the display.The default is 2NO.
6.	Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CID/
	VOL ( or ) button to scroll to 1YES or 2NO.

7.If you select 1YES, press the MUTE/PROG button to confirm your selection. HOLD BASE PAGE WAIT FOR BEEP shows in the display.

26