Tape Counter with Memory Stop
Memory Stop
The tape counter’s memory stop helps you locate a certain point on the tape. When memory stop is turned on, the tape will stop automatically during fast forward or rewind when the tape counter reaches “0000M”.
Using Memory Stop:
1.Press DISPLAY to turn memory stop on. “M” appears after tape counter when memory stop is turned on.
2.Locate the place on the tape you want to return to and press RESET to reset tape counter to “0000M”.
Memory
0000M Stop On
3.Continue to record or play the tape. When you want to return to the place you marked, press REC/PAUSE to stop recording, or press STOP/EJECT to stop playback.
4.Make sure POWER is in VCR. Then press REW (rewind). The tape will rewind until it reaches the tape counter reading of “0000M”.
Notes: Press DISPLAY to turn
Whenever memory stop is turned on, the camcorder will stop rewinding or fast forwarding when the counter reaches “0000M”. To continue rewinding or fast forwarding the tape, press REW (rewind) or F.FWD (fast forward) again.
The tape counter is automatically reset to “0000” whenever a cassette is inserted.
29
