RCA CC632 manual Playback on a TV Without Audio and Video Inputs, Antenna

Playback on a TV Without Audio and Video Inputs

To connect your camcorder to a TV without audio and video input jacks. You will need an optional RF output adapter (such as CRF95) and an optional coaxial RF cable (such as AH065G or AH066G) shown on page 54.

Antenna

				STOP/EJECT
			F.FWD	EDIT–ADV
	REW	PLAYSEL	+
AVDUB	–	TITLE

VCR

OFF

OWER

REC/PAUSETRACKING

OR

1A

OR

FADE

	ON
LIGHT	OFF
AUTO

Antenna

	1B
	Optional 300/75 ohm
Back of TV	Transformer
	(such as 193983)
VHF
OR
		IN
VHF		FROM
		ANT
Optional 75-300 Ohm

Transformer

Optional Coaxial RF Cable (such as AH065G or AH066G)

4 AV OUT/IN Switch AV

OUT / IN

3

Channel Selector

Optional RF Output Adapter

(such as CRF95)

OUT

TO TV

1Disconnect the VHF antenna from your TV. If you are going to leave the RF adapter connected to the TV, connect the antenna to the RF output adapter.

A.If antenna is round 75-ohm cable, connect it to IN FROM ANT connector on RF output adapter.

B.If antenna is flat twin-lead, connect flat-lead connectors to screw terminals on optional 300- 75 ohm transformer. Then connect transformer to IN FROM ANT connector on RF output adapter.

2Attach one end of coaxial RF cable to OUT TO TV connector on RF adapter, and attach other end of the cable to VHF input on TV as shown.

Note: If TV has screw terminals, you may need an optional 75-to-300 ohm transformer, such as AH011.

3Attach RF output adapter’s yellow plug to the VIDEO jack, small plug to the RF DC OUT jack, and white plug to the AUDIO jack on the side of the camcorder.

4Place the AV OUT/IN switch to OUT.

46