RCA DRC7005N manual To cable or antenna

Chapter 6: Additional Information

DigitalMediaRecorder

	INPUT	S-VIDEO	OTPU	UT			COMNENT
		COMPOSITE
RANTIPENNAT/UCABLE	L		L			DIGITALADUIO	VIDYEPOO	TPU TU
		AVIDDUEIOO					PPrb	PROG.
	R		R	G-LINK	IRSAT	COAXIALOPTICAL
								ONSCANO

	OTUTOTV	VIDEO	L	R
	VCRINROMANTENNA	INPTU
To cable or antenna		OTPU TU
	TVCAIBNLER/AONMTENNA

Copying content from the Digital Media Recorder to a VCR videocassette

The following instructions are provided for a general connection in case you might want to copy content from the Digital Media Recorder’s hard disk drive to a VCR videocassette. The back of your TV and VCR probably don’t exactly match the ones shown here. In general, you just need to connect the Digital Media Recorder’s Output jacks to the VCR’s Input Jacks. Also, you need to be able to see what your copying, so the TV needs to be connected.

1.Connect the Digital Media Recorder to the VCR.

1a. Connect a set of audio/video cables to the Digital Media Recorder’s OUTPUT COMPOSITE VIDEO (yellow), AUDIO L (white), and AUDIO R (red) jacks, to the VCR’s Input Jacks (sometimes labeled VIDEO and AUDIO L and R).

2.Connect the VCR to the TV. Connect an RF coaxial cable to the OUT TO TV jack on the VCR and to the IN FROM CABLE/ANTENNA jack on the TV.

3.Make sure all of the components (TV, VCR, and Digital Media Recorder) are plugged into working power outlets.

4.Turn on all of the components.

5.Tune the TV to channel 3 or 4 (depending on the whether the VCR’s 3/4 switch is set to 3 or 4).

6.Change the channel on the VCR to its Video Input Channel (sometimes called LINE or LINE INPUT).

7.Access the menu in the Digital Media Recorder (Video, Music, or Pictures) that contains the content you want to copy.

8.Insert a working videocassette tape into the VCR.

9.Press the RECORD button on the VCR.

10.Start playback of the video, music, or pictures on the Digital Media Recorder that you want to record onto the VCR’s videocassette.