RCA DRD212NW Safety Information, Cautions, Note to Cable TV Installer, Service Personnel

Safety Information

WARNING

To reduce fire or shock hazard, do not expose this receiver to rain or moisture.

Cautions

Note to Cable TV Installer:

WARNING	TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
	REMOVE COVER (OR BACK). NO USER SERVICEABLE
RISK OF ELECTRIC SHOCK	PARTS INSIDE. REFER SERVICING TO QUALIFIED
DO NOT OPEN	SERVICE PERSONNEL.

This symbol indicates “dangerous	This symbol indicates
voltage” inside the product that	important instructions
presents a risk of electric shock or	accompanying the
personal injury.	product.

To prevent electric shock, match wide blade of plug to slot, fully insert.

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’ au fond.

Do not stack electronic components or other objects on top of the DSS Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.

Do not stack the DSS receiver on top of a “hot component” such as an audio power amplifier.

Do not defeat the safety feature of the plug. The wire blade fits into the wall socket only one way. If you need an extension cord, make sure it matches the plug of the receiver/decoder.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Note to Satellite Dish Installer:

This reminder is provided to call your attention to Article 810 and in particular article 810-15 of the National Electrical Code which covers proper installation and grounding of television receiving equipment as well as to article 820-40 of the National Electrical Code which specifies that the satellite dish cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.