Connecting the DSS Receiver
Connection D (Good Picture and Sound Quality)
To use this connection you must have:
•TV with RF input
•Coaxial cables
To connect TV and antenna or cable box:
1. Connect coaxial cables as shown.
To receive DSS programming:
1.Set DSS receiver 3/4 switch to CH3 or CH4 (whichever is not being broadcast in your area.)
2.Tune TV to whichever channel you set the DSS receiver 3/4 switch to in the previous step.
3.Tune DSS to desired channel.
To receive off-air programming (no cable box):
1.Turn DSS receiver off (or press TV/DSS button).
2.Tune TV to desired channel.
To receive cable programming (with cable box):
1.Turn DSS receiver off (or press TV/DSS button).
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
Note: You can use your stereo amplifier line input to hear stereo using this connection. See your stereo amplifier’s Owner’s Manual for specific information.
46
