Connections Menu, Audio Connections, Dynamic Bass

Using the TV’s Menu System

0 Go Back

1 Equalizer Presets

2 Audio Processor

3 Sound Logic

4 Audio Language

5SAP

6Balance

7AudioFixed/VariableConnectionsOut

8 Dynamic Bass

Main Menu Audio

The Audio Connections menu has screens for setting up inputs or outputs that are associated with audio:

•Digital Audio Out: Choose either Auto Select or PCM output.

•DVI Audio Input: Choose a TV audio input for a DVI device.

Press or to point to an option, then press OK to select it. Press to return to the menu.

Audio Connections

The Audio Connections option lets you set up input or outputs associated with audio. When you select the Audio Connections feature, a submenu appears with options: Digital Audio Out and DVI Audio Input.

Main Menu Audio Audio Connections

0 Go Back

Auto Select

1 Digital Audio Out

PCM

2 DVI Audio Input

Choosing Auto Select will send a Dolby Digital signal (when available) out of the DIGITAL AUDIO OUTPUT on the back of the TV. If Dolby Digital is not available then a PCM signal is sent out of the DIGITAL AUDIO OUTPUT.

Choosing PCM will always send a PCM signal out of the

DIGITAL AUDIO OUTPUT.

Press or to point to an option, then press OK to select it. Press to return to the menu.

Main Menu Audio Audio Connections

0 Go Back

Select the TV audio input where the DVI audio is connected.

Input 1

1 Digital Audio Out

Input 2

2 DVI Audio Input

Because an HDMI output carries the audio signal on the same cable as the video, no setup is needed. However, if you connect a DVI output to the TV's HDMI input, you need to connect the separate DVI audio to one of the TV's audio inputs and select that input in this screen. The TV will use that audio input for sound when it displays a DVI signal.

Press or to point to an option, then press OK to select it. Press to return to the menu.

Digital Audio Out Allows you to receive Dolby Digital surround sound if transmitted and you’ve connected a six-channel receiver to the TV’s DIGITAL AUDIO OUTPUT jack with a digital optical cable. Choose the correct setting in the Digital Audio Out menu:

•Auto Select Your TV automatically chooses between Dolby Digital and PCM based on the audio signal it is receiving. This is the best selection if you have a decoder with Dolby Digital and PCM that was manufactured in the last several years.

• PCM (Pulse Code Modulation) The TV sends all signals through the Digital Audio Output in PCM.

DVI Audio Input Allows you to select the audio input you’re using if you’ve connected an HDMI/DVI cable adapter to the DVI input. Select from the inputs listed.

0 Go Back

1 Equalizer Presets

2 Audio Processor

3 Sound Logic

4 Audio Language

5SAP

6Balance

7AudioFixed/VariableConnectionsOut

8 Dynamic Bass

Main Menu Audio

Off

Medium

High

A change in the screen is applied to all inputs.

Press or to point to an option, then press OK to select it. Press to return to the menu.

Dynamic Bass

The Dynamic Bass option provides additional bass enhancement for the audio. Choose Off, Medium, or High depending on your preference.

		Main Menu
	0 Go Back	The Connections menu has screens for specifying and
	1 Picture Quality	optimizing the connections (inputs) to the TV:
	1 Picture Quality	•Signal Strength: Check the signal strength of a channel.
	2 Audio	•Signal Strength: Check the signal strength of a channel.
	2 Audio	•Channel Search: Search for available channels in your area.
	3 Parental Controls
	3 Parental Controls	•Software Upgrade: Check software version and upgrades.
	4 Connections	•Signal Source: Lost remote? This screen changes inputs.
	5 Preferences	•Video Input Setup: Choose component or composite video.
	5 Preferences	•Auto Tuning: Create one button access to your devices.
	6 Assisted Setup	•Special Features: For advanced users only.
		•Ethernet Setup: Configure the Ethernet connection settings.
		Press OK or to access the Audio menu.